Continuous level measurement, point level detection, interface measurement and density measurement in extreme process conditions.
The gamma source is a cesium or cobalt isotope emitting radiation. The radiation is received by a compact transmitter. As the radiation penetrates material, it is attenuated. The measuring effects thus results from the degree of absorption of the radiation by the product to be measured as the level changes.
Especially suited to:
Radiometric instrumentation is used where other measuring principles are excluded due to extreme process conditions or mechanical, geometrical or constructional circumstances. For level measurement, continuous point level monitoring, interfaces and the determination of density.
- Four measuring tasks in one measuring principle
- Non-contact, external measurement for the highest degree of safety and reliability under the most extreme process conditions
- Functional safety up to SIL 2/3 according to IEC 61508
- Highest sensitivity and accuracy at lowest dose rates (ALARA principle)
Gammapilot provides non-contact measurement from outside in all extreme applications, e.g. very corrosive, aggressive and abrasive media. The measurement is performed irrespective of medium, process temperature as well as process pressure. Functional safety up to SIL 2/3 according to IEC 61508 as well as WHG overspill protection.
Process temperatures and process pressures: No limitations (non-invasive, external)